The Metriful sensor board with built in air quality, temperature, humidity, light and sound measurements.

Supplied with an unsoldered (loose) header pin strip. You will need to solder the pin strip to the board connections before use. Alternatively, you can solder the board directly to wires, or surface mount on another circuit board.


This item does not include connecting wires or particle sensor, both of which can be purchased separately, if required.


The board can be used with Raspberry Pi, Arduino, ESP8266, ESP32 and many other host systems.

Minimum host system requirements: I2C-compatible port, voltage of 3.3V or 5V, at least one digital input (three digital inputs for full functionality).


For further technical details, visit our product page and GitHub repository for documentation and example software.

Header strip selection

Choose either:

  • Straight - the pins project below the board and are best for plugging into breadboards, but can also be connected directly to jumper wires.
  • Right angle - the pins are parallel to the board surface and can be more convenient for direct jumper wire connection.


Metriful MS430 Sensor Board without Header


    © 2020 Metriful Ltd.

    Metriful Ltd is registered in England & Wales.  Company Registration Number: 12397348.

    Registered office address: 27 Old Gloucester Street, London, WC1N 3AX, United Kingdom